ASCOT HOT TUB/SPA CLEANING SERVICING & VALETING & PART'S STORE !!

Hot Tub /Spa Error Codes

 

 please Have a look a round lots of low price's in our Hot Tub /Spa Parts/Filter/chemical  shop

As a Thank-you :

Click Here for more 

BALBOA ERROR CODE

Help

 

 

 

ALL Free To you By PETER THE HOT TUB MAN

BALBOA ERROR CODES

Click Here for more Help

Balboa Error Codes

pd = Power supply, unit running on battery backup

OH = sensors reading 112-118 degrees

Flo = Improper flow or pressure Switch

Cool = Water temp 20 degrees below set point

ICE = Potential freeze condition has been detected.

Sn1 = Hi-limit sensor malfunction

Sn3 = Temp sensor malfunction

ILOC = Interlock failure  possible Pump or ozone spike.

malfunction detected

 

HURRICAN ERROR CODES

PS = Flow or pressure Switch failure

SH = Shorted sensor

OP = Open sensor

LO = Temp below 60 degrees  freeze

HL = Temp above 118 degrees

 

Hercules Error Codes

OH = Spa temp exceeds Acceptable limits

FLO = Flow problem

ICE = Freeze condition detected

SN1 = Hi-limit sensor failure

SN2 = Temp sensor failure

 

SUNDANCE ERROR CODES

ILOC = Interlock failure

OH = Sensor indicates water temp above

FLO = Pressure Switch malfunction

acceptable limits

Hold = Panel buttons pressed to many time to quickly

HOT = PCB temperature above acceptable limit

ICE = Freeze condition

PnL = Communication between PCB and panel interrupted

Sn1 = Hi-limit sensor malfunction

Sn3 = Temp sensor malfunction ----- = Watch dog  Potential damage to spa

 air blower on equipment

 

BRETT ERROR CODE

OH = temp exceeds 118 degrees

Fr = Freeze condition temp below 40 degrees

FL = Pressure switch failure

EO = Shorted temp sensor

E1 = Open temp sensor

E2 = Shorted hi-limit sensor

E3 = Open hi-limit sensor

E4 = Shorted flow switch

E7 = Improper electrical connection

 

GECKO ERROR CODES

FLO = Pressure Switch failure, switch open

FLC = Pressure switch failure, switch closed

Prr = Temp sensor failure

Prh = Hi-limit sensor failure

FrE = possible freeze condition detected

 

VITA ERROR CODES

HiLi = Water temp over acceptable limit

BJ2P = Pump/Blower purge  Normal condition

FP = Freeze protect  temp under acceptable limit

SS=0; SS=S; LS=O; LS=S = Multiple causes; Open sensors, bad connection to panel, Improper voltage,

etc.

please Have a look a round lots of low price's in our Hot Tub /Spa Parts/Filter/chemical  shop

DISCLAIMER:

Use AT YOUR OWN RISK, including information given by telephone or email.

We will not be held liable for any injuries or damage that may result from the troubleshooting or installation of any parts or equipment.    including inadequate results from any project.

We are assuming you have a knowledge of electricity and are aware that certain safety precautions are necessary.

If you are in doubt as to how to properly troubleshoot or repair your specific unit, please contact a local licensed pool or spa professional or a licensed electrician in your area.

 

Sale

Unavailable

Sold Out